Carpentry Instructor-Social Justice Department 336/2016 Answer Key 59/2017

hammer-wood yellow

Post : Carpentry Instructor
Department : Social Justice Department
Category Code : 336/16
Question Paper Code : 59/17
Date of Test : 24-05-2017


  1. Spoke shave is a kind of
    • chisel
    • plane
    • saw
    • gouge

  2. A systematic arrangement of equipment, work areas, spaces needed for material movement and all other supporting activities in an industrial organization
    • location layout
    • site layout
    • plant layout
    • none of these

  3. In which type of core box is used when a core with an irregular shape is required?
    • half core box
    • split core box
    • strickle core box
    • gang core box

  4. It is the shape of which gives the screws its name
    • head
    • shank
    • thread
    • gauge

  5. It is one of the oldest method of ornamentation of timber
    • relief carving
    • figured timber
    • wood carving
    • inlaying

  6. The blade of a chisel is made up of forged tool steel, and angle of cutting edge in degree measure of
    • 30
    • 25
    • 45
    • 90

  7. A cylindrical hollow piece of metal placed below the nut to provide smooth bearing surface for the nut to turn on
    • Washer
    • Lock nut
    • Castle nut
    • Bush

  8. Spring is a defect of timber occurred
    • end of the piece of timber
    • interior of the piece of timber
    • a curvature along the edge of board
    • away from edge of timber

  9. Cutter of tenoning machine which is made by
    • cast iron
    • tool steel
    • copper
    • mild steel

  10. The central layer of plywood is called
    • Face ply
    • Core ply
    • Cross ply
    • Main ply

  11. In which change takes place to manufacturing sunmica, all the veneers are combined to form a homogeneous solid?
    • sublimation
    • fusion
    • condensation
    • polymerisation

  12. Parallel blocks of different types are used to setting work pieces for
    • machining
    • chamfering
    • drilling
    • tapping

  13. Which solder may use to general sheet metal applications?
    • common solder
    • fine solder
    • coarse solder
    • extra fine solder

  14. The segmental pattern works like a
    • Match plate pattern
    • Sweep pattern
    • Loose piece pattern
    • Single piece pattern

  15. This glue is a chemical extract from the curds of skimmed milk to fine yellow powder
    • animal glue
    • resin glue
    • casein glue
    • vegetable glue

  16. When volume calculation of logs of timber, take the measurement of girth diameter always
    • middle of the log
    • one-fourth of the log
    • along the log
    • one-third of the log

  17. The technical term used in roofing construction, the vertical distance between the top of the ridge and the wall plate is
    • span
    • ridge
    • pitch
    • rise

  18. Density varies in different timbers. Heavy to very heavy timbers have density of
    • below 750 kg/c.c.
    • above 750 kg/c.c.
    • above 800 kg/c.c.
    • above 1000 kg/c.c.

  19. Following are the one of the fastest method of wood seasoning
    • air seasoning
    • chemical seasoning
    • electric seasoning
    • boiled seasoning

  20. It is the separation of the wood extending for a few measurement along the grain when drying
    • collapse
    • check
    • bowing
    • cupping

  21. A log is a __________ of a tree with branches cut off and bark removed.
    • baulk
    • trunk
    • post
    • planks

  22. Collapsible carpenter’s rule is also known as
    • zig-zag rule
    • folding rule
    • steel rule
    • none of these

  23. The saw which consists frame, connecting bar, lever and two handles on both sides
    • coping saw
    • jack saw
    • two man saw
    • bow saw

  24. An outermost portion of the cross-section of timber is
    • pith
    • core
    • cambium layer
    • barck

  25. The name of a hammer is designated by the shape of
    • handle
    • cheek
    • pein
    • eye hole

  26. These joints can be readily noted on the corners of picture frames
    • mitre joints
    • box joints
    • framing joints
    • grooved joints

  27. It is the term applied to boring holes for heads of screws where countersinking would not be sufficient
    • wedging
    • pocketing
    • dowelling
    • keying

  28. The vertical member which is fixed between string and handrail to give support to the hand rail
    • run
    • soffit
    • baluster
    • header

  29. The wood surface produced when the side is placed at an angle other than 45 degrees to the edge is
    • bevelled edge
    • splayed edge
    • arris edge
    • nose edge

  30. ___________ are made up of country wood strips of various sizes ranging from 18 mm to 38 mm in thickness.
    • Blackboard
    • Hardboard
    • Plywood
    • Chipboard

  31. Which material used for making carpenter’s chisel?
    • mild steel
    • stainless steel
    • forged tool steel
    • tungsten carbide tool steel

  32. It is a round metal ring placed in between the neck and tang of the chisel
    • the handle
    • the blade
    • the edge
    • the ferrule

  33. The mallet is a
    • holding tool
    • supporting tool
    • measuring tool
    • striking tool

  34. The box which is built up of three pieces of wood, one is base and other is parallel to each other for cutting 45 degree angle
    • mitre block
    • mitre box
    • plummer block
    • none of these

  35. Which tool is used for laying out larger circles and arcs on the wood pieces?
    • divider
    • trammel points
    • spirit level
    • try square

  36. The joints which are used for joining wood pieces along their edges in order to obtain increased breadth
    • widening joints
    • framing joints
    • box joints
    • circular joints

  37. Pin and socket is in connection with the joints of
    • housing joints
    • lap joints
    • bridle joints
    • scarf joints

  38. How many spurs are there in a mortise gauge that can be spaced at different distances?
    • one
    • two
    • three
    • four

  39. __________ are kind of files which generally used in the woodworking trade for shaping and forming irregular pieces and curves.
    • Planes
    • Gouges
    • Rasps
    • Saws

  40. __________ is in timber refers to the general direction or alignment of wood cells.
    • Grain
    • Colour
    • Hardness
    • Density

  41. S.I. Unit of relative density is expressed as
    • gm/c.c.
    • kg/c.c.
    • newton
    • none of these

  42. 2 cubic feet is equal to
    • 0.0566 cu.m.
    • 0.0283 cu.m.
    • 0.566 cu.m.
    • 0.283 cu.m.

  43. In British system of units, ‘Gallon’ is represented for
    • area
    • volume
    • mass
    • length

  44. The property of a metal to be flattened into thin sheets without cracking
    • plasticity
    • stiffness
    • malleability
    • hardness

  45. Bell metal is an alloy of
    • copper and lead
    • copper and zinc
    • tin and lead
    • copper and tin

  46. The process of heating and cooling of metals to improve their mechanical properties
    • casting
    • heat treatment
    • forging
    • moulding

  47. The Sine Rule is used to find out the solution of
    • triangle
    • trapezium
    • rhombus
    • rectangle

  48. The product of mass and velocity of a body is called
    • momentum
    • moment of inertia
    • impulse
    • velocity

  49. Which one of the following below is a vector quantity?
    • energy
    • velocity
    • speed
    • time

  50. Muscular and mechanical forces are examples of
    • frictional forces
    • non-contact forces
    • magnetic forces
    • applied forces

  51. Name the hacksaw frame on which only one standard blade can be fitted
    • adjustable hacksaw frame
    • zig-zag frame
    • solid hacksaw frame
    • loose hacksaw frame

  52. Main fuel used in the hand forge is
    • hard coke
    • wood
    • charcoal
    • lignite

  53. Which one of the following type of solder is used for soldering jewelry?
    • common solder
    • eutectic solder
    • coarse solder
    • extra fine solder

  54. The slots on the angle plate are given for
    • reducing weight
    • aligning the work
    • lift using hooks
    • accommodating bolts

  55. The angle of single cut file is in the degree of
    • 65
    • 70
    • 75
    • 80
    Question error

  56. The depth of the trench in housing joint is
    • 1/5th thickness
    • 1/3rd thickness
    • 1/2th thickness
    • 2/3rd thickness

  57. Which wood usually has thin walled cells?
    • hardwood
    • soft wood
    • light soft wood
    • plywood

  58. The purpose of seasoning is not to reduce
    • weight
    • shrinkage
    • hardness
    • warpage

  59. Which one among the following medium is used in kiln seasoning?
    • water
    • hot air
    • chemical
    • smoke

  60. A timber with heavy weight is considered to be
    • darker in colour
    • closed grain
    • uniform grain
    • sound and strong

  61. To sharp the band saw blade the suitable blade is
    • flat file
    • round file
    • triangular file
    • half round file

  62. A trunk of a tree with branches cut off and bark removed is
    • log
    • bulk
    • post
    • plank

  63. Which one of the statement is not correct in respect to the ‘CUTTER’ in tenoning machine?
    • made of tool steel
    • form the surface of the tenon
    • cutting edges beveled and shaped
    • fixed with the carriage

  64. It is a combination of tread and riser. It is a space of stair which permits ascent and desent
    • stair
    • staircase
    • step
    • tread

  65. A stud of short length in partition as an opening is called
    • head
    • puncheon
    • post
    • stud

  66. It is an additional horizontal member used in between the head and sill to make the partition more rigid and strength is
    • nogging
    • brace
    • roof
    • inter tie

  67. Which part of the wood contains more water?
    • hardwood
    • soft wood
    • heartwood
    • sapwood

  68. Which one of the sawing operation is not related to circular saw machine?
    • mould cutting
    • mitre cutting
    • mould cutting
    • cross cutting
    Question error

  69. What are the different thickness of 7 ply board?
    • 3, 4, 5 and 6 mm thickness
    • 5, 6, 7, 8 and 9 mm thickness
    • 12, 15, 16 and 19 mm thickness
    • 9, 12, 15 and 19 mm thickness
    Question error

  70. The process of cutting series of recesses or pockets with sides which slope into the wood at an angle to the surface is
    • inlaying
    • relief carving
    • wood carving
    • chip carving

  71. Lead is used as the supporting tool while punching because
    • it is a soft material
    • it is a hard material
    • it does not break
    • it does not slip

  72. What do you understand by pattern layout?
    • Full scale drawing with complete details
    • Full scale drawing without details
    • Any scale drawing with complete details
    • Any scale drawing without details

  73. Cones and pyramids or their frustum are developed by
    • parallel line method
    • triangulation method
    • radial line method
    • geometric construction method

  74. During bronze welding the filler metal ‘balls up’ does not melt. To rectify this defect
    • add more flux
    • increase pre-heating period
    • clean and remove the oxides
    • tilt the joints

  75. It is the distance a threaded component moves along the matching component duringone complete revolution.
    • pitch
    • hand
    • helix angle
    • lead

  76. Solder is an alloy of
    • Tin and lead
    • Tin and copper
    • Copper and zinc
    • Lead and zinc

  77. This defect lies in the sapwood which accompanies wane due to economical conversion of log of tree
    • spiral grain
    • wavy grain
    • waney edge
    • knots

  78. Volume of timber which measured as the unit of
    • cu.ltr.
    • sq.m.
    • sq.ft.
    • cu.ft.

  79. The lower edge of the inclined roof surface is called
    • Eaves
    • Hip
    • Verge
    • Valley

  80. Which is the solvent of shellac?
    • Turpentine
    • Paint
    • Alcohol
    • Linseed oil

  81. Ahmedabad city is on the bank of which river?
    • Yamuna
    • Sabarmati
    • Hugli
    • Sarayu

  82. Oldest mountain range in India
    • Himalaya
    • Vindhya-Satpura
    • Western Ghat
    • Aravalli

  83. Anthyodaya Annayojana was started in which Five Year Plan?
    • 7th Plan
    • 8th Plan
    • 9th Plan
    • 10th Plan

  84. In which year did Nithi Ayog officially come in to existence?
    • 2015 January 1
    • 2015 February 1
    • 2015 March 10
    • 2015 April 14

  85. Who is the brand Ambassador of Harithakeralam project?
    • Manju Warriar
    • Mohanlal
    • Sachin Tendulkar
    • Yeshudas

  86. Who declared jihad against British during 1857 revolt?
    • Nawab Wajid Ali
    • Moulavi Ahamadullab
    • Begam Hasrath Mahal
    • Shahmal

  87. In which Congress Session was non-cooperation movement decided?
    • Nagpur Session 1920
    • Lahore Session 1929
    • Kakinada Session 1923
    • Amritsar Session 1919

  88. In which Act granted separate electorate for Muslims?
    • 1947 Indian Independence Act
    • 1919 Montague Chelmsford Act
    • 1935 Govt. of India Act
    • Minto Morley Reforms 1909

  89. Which union territory in India registered highest literacy rate?
    • Pondicheri
    • Lakshadweep
    • Andaman Nicobar
    • Delhi

  90. Which place in Kerala was known as ‘Nalanda’?
    • Kanthalloor
    • Moozhikkalam
    • Thrikkana Mathilakam
    • Srimoola Vasam
    Question error

  91. The magazine in which Sree Narayana Guru proclaimed ‘No caste for us’ in 1916.
    • Prabudha Keralam
    • Vivekodayam
    • Koumudi
    • Yoganadam

  92. Which social reformer is known as ‘Bharat Kesari’?
    • T.K. Madhavan
    • Ayyankali
    • V.T. Battathiripad
    • Mannath Padmanabhan

  93. Which of the following was written by Vagbhatananda?
    • Kanneerum Kinavum
    • Abhinava Keralam
    • Darsanamala
    • Pracheena Malayalam

  94. The social reformer who declared that ‘one caste one religion, one clan, one God andone world’?
    • Sree Narayana Guru
    • Sahodaran Ayyappan
    • Vaikunda Swamikal
    • Kumaranassan

  95. In which year Chavara Kuriakose Elias Achan was canonized by Pope Francis?
    • 23rd November 2014
    • 23rd November 1986
    • 2nd February 2013
    • 10th March 2012

  96. Who was awarded Nobel Prize for literature in 2016?
    • Gunthar Gras
    • Juan Manual Santos
    • Oliver Hart
    • Bob Dylan

  97. Which book received Vyalar Award in 2016?
    • Arachar
    • Thaksham Kunnu Swaroopam
    • Manushyanu Oru Amu Kham
    • Edikkaloori Panambattadi

  98. Which political party was recently recognized by election commission?
    • Telugu Desham
    • AID MK
    • Trinamool Congress
    • Janatha dal Secular

  99. Who won us open tennis for woman in 2016?
    • Anjelica Kerber
    • Veenas Williams
    • Serena Williams
    • Mariya Sharapova

  100. Who is the present Chief Justice of Kerala High Court?
    • Chelamaswar
    • Mohana Santhana Gowdar
    • Manjula Cheloor
    • Ashok Bhooshan

%

Post a Comment

0 Comments